Promark - Camera LED Board Replacement

Tools:

Phillips screwdriver

Step 1

Unscrew the screws close to the lens.

Step 2

Unplug the cable connected to the board.
(Please note that depending on your model, you may have one or two cables.)
(The photos below are taken from M20.)

One cable (For M Series)	Two cables (For D Series)

Step 3

Plug the cable(s) into the new board. The cable(s) can be plugged randomly. 
It does not require a specific position. 

Step 5

Fix the board by screwing the screws and the work is done.

#END