Remove leftover cutting and engraving bits from the work area whenever there is a buildup. A buildup of leftover bits can create a fire hazard.
1. To remove the honeycomb plate, first move the laser head to the top left corner, lift the honeycomb plate slightly and slides it toward you.
Mind the sharpness of the plate surface to avoid cutting injury.
2. Use a vacuum cleaner or brush to clean the leftovers bits under the plate. Detergent can be applied to remove the stains
3. Return the plate to the original location, sliding it horizontally. Be careful not to contact the laser head or the rails.
Comments
0 comments
Please sign in to leave a comment.