A. Object Placement
：Zoom in and zoom out
：Group multiple items together
：Align multiple items horizontally
：Align multiple items vertically
：Distribute selected items horizontally between the left and right borders
：Distribute all selected items vertically between the top and bottom borders
：Merge and unite multiple items into one
：Subtract the overlapping area of two items
：Keep only the overlapping area of multiple items
B. Object Editing
：Select or move a specific object
：Import JPG/PNG/SVG/DXF file. You can also drag the file into the software
：Font, size and spacing can be set when a text object is created. Enable Infill or "Outline"
：Set dimensions for a round object
：Set dimensions for an oval object
：Set dimensions for a polygon object
：Create a vector curve
：Copy selected objects into a rectangular array
：Enable / disable camera preview
C. Layer Management
：Create and name a new layer
：Delete selected layer
：Rename selected layer
：Sequence arrangement. Working sequence will be top to bottom.
D. Power and Speed Setting
Parameters for commonly used material can be found in the "Parameters…" drop down menu. Customized parameters can be set using "Save". Use "Manage" to edit or remove saved parameters. Power is set by percentage which means a 40W machine can output 40W if the power setting is 100%. Speed is set by mm per second. Execution count can be set to repeat the same action on a single layer.
Parameters may vary with different materials. Try built-in parameters on first run and then fine tune the parameters for better results.
Power setting is recommended to not exceed 70% to avoid drastic consumption of laser tube.