The frequency recommended is once every 1 – 2 weeks.
Clean and lubricating the guiding rods and rail periodically can extend the lifetime of the moving parts.
1. Wipe away the oil grease on the guiding rods and rail using a paper towel.
2. Apply lubricant on the guiding rods of the Y-axis.
3. Apply lubricant on the top and the side of the linear rail of the X-axis.
4 Move the laser head up-and-down, left-and-right several times to evenly distribute the lubricant.
Comments
0 comments
Please sign in to leave a comment.