User Interface & Tutorial

1. Connect your phone and machine to the same wireless network.
2. Input the IP address displayed on your machine to establish connection between phone and machine. (Control panel > Internet > Wireless network IP)

*The machine and your phone must be on the same wireless network platform in order to establish connection.

3. Press “Confirm” in order to establish connection with your machine.

4. Interface

A. Camera preview – Preview the current location of your object in the working area.
B. Set parameters – Set the desired parameters for your engraving or cutting command, which includes “power” and “speed”.
C. Add picture – Import files desired to engrave or cut, directly from the media library of your phone.
D. GO – Confirm execution of current command.
E. BACK – Return to the previous step

5. Tutorial

A. Camera preview

(1) Drag with your finger the area that you want to preview.
(2) Clear preview – Delete the previous preview to preview again.
(3) GO – Confirm execution of current engraving or cutting command.

B. Set parameters

(1) In this option, you can individually set the “power” and “speed” for your engraving or cutting commands.

*Power and speed settings:
Power level is displayed in percentages, which means that by setting a 30W machine to 100%, the output wattage would be 30W. Speed is set according to how many millimeters laser head moves per second.

*Adjusting the power level to over 70% is not recommended, as it reduces the lifespan of the laser tube drastically.

(2) For recommended parameters for different materials, please refer to the following picture and numbers:

Wood - 
3mm cutting: power 55%, speed 5mm/s
5mm cutting: power 55%, speed 4mm/s
Monochromic engraving: power 30%, speed 180mm/s
Shading engraving: power 15%, speed 80mm/s

Acrylic - 
3mm cutting: power 55%, speed 4mm/s
5mm cutting: power 55%, speed 5mm/s
Monochromic engraving: power 30%, speed 180mm/s
Shading engraving: power 15%, speed 80mm/s

Leather - 
3mm cutting: power 60%, speed 3mm/s
5mm cutting: power 60%, speed 3mm/s
Monochromic engraving: power 30%, speed 150mm/s
Shading engraving: power 15%, speed 80mm/s

Fabric - 
3mm cutting: power 50%, speed 20mm/s
5mm cutting: power 50%, speed 20mm/s
Monochromic engraving: power 20%, speed 150mm/s
Shading engraving: power 15%, speed 80mm/s

Rubber - 
Monochromic engraving: power 50%, speed 140mm/s
*Note: Different rubber materials result in different impurities after reacting with the laser. Using a tooth or any suitable brush to brush off the impurities, then proceed to engrave a second time is recommended.

Glass - 
Monochromic engraving: power 35%, speed 150mm/s

Stainless steel (FLUX Stainless Steel Spray required) - 
Monochromic engraving: power 50%, speed 80mm/s

C. Add picture

To add a picture to the app, please refer to the following 3 methods:

(1) Add photo – Import a photo from the media library of your phone in order to execute a command. (File formats: JPG/PNG/DXF/SVG)
(2) Camera – Activate the camera function of your phone to take a photo, and import it directly into the app to execute a command.
(3) Canvas – Create your own design or textual fonts directly in the app, and directly execute it as a command.