Adjusting the focus

1. Rotate the focus bar (acrylic bar) downward until it's vertical.

2. Rotate the level adjustment knob to move the platform up and down. 

Make the surface of the workpiece slightly touches the end of the focus bar (acrylic bar) so the height is on the right focus.

3. Rotate the focus bar upwards until it is vertical. 

💡 Remember to check the focus before each task 

💡 If the probe is broken, you can download the dxf file here and make one yourself.  

💡Note: Under circumstances without the focus probe, to make sure the object is in focus, you can use "US quarters *6" or "Euro 0.5 *5", which should be equivalent to 12mm (focus distance). Other objects close to this number is viable as well.