Notice: Before starting, please make sure to check your firmware version. If you have version 4.1.1, it must be updated to version 4.1.6 or above.
Here are the updating instructions:
- Make sure your machine is connected to the internet. Then, go to 'Machine' on the panel and select 'Update Firmware to the Latest Version.'
- Download the machine firmware. After connecting your machine, use Beam Studio to upload the firmware file for the update.
- Update beamo Firmware with USB Drive.
Download the latest Beam Studio version from the official FLUX website.
Please go to the official FLUX website > "Supports"> "Downloads" and select the Beam Studio version from the drop-down list according to your operating system.
Comments
0 comments
Please sign in to leave a comment.