Everyone's sensitivity to electric current is different, that is, everyone will have different degrees of feelings about leakage. Due to the design mechanism of the laser tube, there will be a slight controlled leakage current for the tube to function properly, which is a normal phenomenon, do not worry too much. The laser cutting machine must be properly grounded while using. If it is properly grounded, there will be no leakage. If you touch the machine when it is operating, and you may feel a minor electric shock, it may be the 3-prong outlet is not properly grounded, or the third prong is not fully grounded.
Preparation Items :
Self-preparation :
1 | Phillips screwdriver
2 | Ground wire
3 | 3-prong adapter
Comments
0 comments
Please sign in to leave a comment.