Preparation Items :
1 | Vacuum cleaner or brush
2 | Paper towel or tissue paper
3 | Air conditioner coil foaming cleaner
1. Take the honeycomb table out : Move the laser head to the upper left of the working range > Reach the front of the machine, lift the honeycomb table up and pull it out. As shown in the picture above.
2. Clean the honeycomb table : Use a vacuum cleaner or brush to clean the large residue and dust > Spray the honeycomb table with the air conditioner coil foam- ing cleaner > Wait for the tar oil to soften, then wipe it with paper towel or tissue paper to remove the tar.
3. Put the honeycomb table back : Place the honeycomb table at a 45-degree angle into the chassis and lay it flat.
Please sign in to leave a comment.