Preparation Items :
1 | 2.5mm hexagonal wrench
Included in the accessory box :
2 | Torx screwdriver
3 | Double head wrench
4 | Double-sided tape
Test Items :
1. Stop using the machine when there is an abnormal sound : If the laser outlet does not show light and the laser tube makes a "cracking" sound during the use of the machine, it means that the laser tube is malfunctioning.
Please stop using it immediately to avoid overloading the power supply and causing damage to other parts.
2. Observe whether there is light in the laser tube : If there is no obvious noise but still no laser beam comes out, please observe whether there is a light from the laser tube. Go to the “MAINTAIN” page > Make sure the power setting is x 1.00 > Close the door cover > Click on “Laser Pulse” > At the moment of clicking, you should see a pinkish fluorescent light instantly from the laser tube observation hole. If there is fluorescence, it means the laser is operating normally, please refer to 【Maintenance】Optical Path Alignment .
If there is no fluorescence, please contact your reseller.
Troubleshooting Records :
1. Video :
Record the laser tube observation hole status at the moment of pressing “Laser Pulse” (whether there is pinkish fluorescence).
2. Photo :
If there is pink fluorescence, please provide double-sided tapes on 3 reflective mirrors after optical path alignment (shapes and colors of laser spots).