2-1 Unboxing – FLUX Help Center

Two or more people are required to lift the machine to avoid injury.

01 The box contains the machine and the accessory box.

02 Take the machine out of the box and place it on a stable surface. Please keep the original carton and cushioning material for future use.

03 The accessory box contains：
1 | Torx screwdriver

2 | 2.5mm hexagonal wrench

3 | 3mm hexagonal wrench

4 | Double head wrench

5 | Lubricating oil

6 | Funnel

7 | Vent hose

8 | Power cord

9 | Double-sided tape

10 | Clamp

11 | USB cable

12 | Wi-Fi dongle

13 | Pyramid cones

14 | Manual

15 | Wood piece

16 | A4 (Letter size) paper

___2022-09-01___12.35.07.png

04 Machine front：

1 | Laser head

2 | Honeycomb table

3 | Probe

4 | Height adjustment button

5 | Door cover

6 | Touch panel

7 | Power button

___2022-09-01___12.43.26.png

05 Machine rear：

1 | USB-A port

2 | USB-B port

3 | Ethernet port

4 | Power supply

5 | Water pump cover

6 | Ventilation fan and exhaust port

___.001.png

06 Machine right：

1 | USB-A port

___2022-09-01___1.22.07.png

Unboxing HEXA:(Turn on CC if needed)

(During the Start-up test, please make sure to remove the mirror protection films which are not shown in this video.)

Related articles