Click on menu > File > Samples > Example of beamo or Beambox.
Click on "Go," select your machine and click "Start" to run the task.
Import the Test File.
Press 「Go」and choose your machine.
Press 「Start」to run the test.
1. If the engraving result is blurry, unclear, or light in color:
Please check whether the focal length is correct. If the focal length is correct, it is recommended to check the optical path alignment. Please refer to maintenance: 5-1 Optical Path Adjustment.
2. If there is a serious deviation between the actual engraving position and the camera preview position on the software:
Please check whether the focal length is correct. If the focal length is correct and there is still an error, please refer to Troubleshooting: 6-9 Camera Alignment Issue
Please sign in to leave a comment.