Beam Studio v2.7.3

Added

1. Added Promark UV laser source support, including 3D Inner Engraving mode.
2. Added Calibration > Manual Configuration, allowing direct editing of camera preview offsets, module offsets, and Print and Cut offsets. Fisheye models also support per-region wide-angle offsets with blending.
3. Added a per-layer Laser Frequency advanced setting (20–500 kHz) for supported models and firmware versions.
4. Added multiple Promark lens profiles. Field lens, galvo, and red-dot parameters can be saved independently for each work area, are applied automatically when switching machines, and are checked against supported ranges.
5. Added support for negative Print and Cut offsets (down to −3 mm), allowing cut lines to be inset for bleed.
6. Added automatic error report uploads. Error dialogs can include diagnostic information, and upload preferences can be set under Settings > Privacy: Ask, Always, or Never.

Changed

1. Changed the default beamo II 4C ink cartridge version to V2 for fresh installations.
2. Moved Windows firewall rule setup to the installer, so launching the application no longer requires administrator privileges.
3. Improved the remaining-time display across all languages.

Fixed

1. Fixed beamo II camera calibration getting stuck due to accumulated door-check requests.
2. Fixed Spanish translation errors.