What should be cared when making your own model

After printing everything you can find online, maybe you will want to try to make your own model. In this article, we would like to offer some tips so your model can be printed easier for FLUX.

The key to making perfect printable model is to avoid overhang and support. Though FLUX can deal with extreme overhang, it can still likely cause distortion when printing, and if used, support will inevitably leave marks after removing.

So when you are designing your own model, try to keep the overhang angle as small as possible, or keep a "base" side, which you don't really care the quality of this side, and when printing the model with this side at the bottom the overhang will be diminished.

[example]