3-6 Wide-Angle Camera Calibration – FLUX Help Center

⚠︎ Before you start, please ensure your Beam Studio and HEXA RF firmware are updated to the latest versions.

Description

This article will guide you through the wide-angle camera calibration process.

When is camera calibration needed?

Using the wide-angle camera feature for the first time.
The machine has been moved.
There is an offset between the camera preview and the actual engraving position.

Step 1 - Check Software and Firmware Versions

Required Software Version: Beam Studio 2.6.2 or above Screenshot 2026-02-09 at 3.51.12 PM.png

Required Firmware Version: 6.2.2 or above

Step 2 - Prepare Materials

Materials to prepare:
Four A4 white papers or light-colored wooden boards of the same size 白紙.png

Step 3 - Start Wide-angle Camera Calibration

Create a new project, select the name of the machine to be calibrated, and click "Calibrate" "Calibrate Camera (Wide-angle Camera)"

Step 4 - Place Paper or Material

Place the four A4-sized white papers or light-colored wooden boards of the same size in the four corners of the working area and focus.

Step 5 - Engrave Calibration Image

Click to start engraving the calibration pattern

Step 6 - Align Markers

Each of the four sheets of white paper or material has four alignment points that need to be matched. Please follow the steps in the video below to complete the alignment.

#END