Beam Air Pro - Mainboard Replacement Guide

Step 1 - Turn off the power and remove the power cord.

Step 2 - Open the four buckles and remove the top cover.

⚠︎ Notice: Please pay attention to the position of your fingers to avoid pinching from opening buckles.

Step 3 - Remove the filters

Refer to the first three seconds of the video to remove the filters.

Step 4 - Remove the bottom cover

Flip Beam Air Pro and use a Phillips screwdriver to unscrew the 20 screws to remove the bottom cover and rollers.

Step 5 - Remove the cable and screws on the mainboard

Remove the cables

Use a Phillips screwdriver to unscrew the four screws.

Step 6 - Remove the mainboard

Step 7 - Install the new mainboard

Screw one of the fixing screws on the mainboard halfway.

Align the USB-B connecter on the back of the mainboard with the hole on the chassis, and then screw the diagonal screws to fix the position of the mainboard.

Screw the four screws to fix the mainboard.

Connect all the cables.

Step 8 - Install the bottom cover

Confirm the direction and install the cover.

Use a Phillips screwdriver to screw the 20 screws to fix the bottom cover and rollers.

#END