Product & Warning labels
Safety Precautions
⚠ Do not let minors operate alone.
⚠ Confirm that the person who intends to operate the machine has read the safety precautions carefully and followed the instructions in the manual.
⚠ Make sure to install the vent hose properly. An exhaust hose missing or not installed properly will increase the risk of fumes and dust hazards.
⚠ Connect to a properly grounded outlet.
⚠ Checktheintegrityoftheelectricalpowercable.Connect the power cable to an isolated electrical supply. The socket outlet should be installed near the equipment and be easily accessible.
⚠ Do not share the same power outlet for the Beam Air Pro and the laser cutting machine.
⚠ Before replacing any filter, please turn off the power, unplug the device, and ensure the filter is inserted in the correct direction.
⚠ Always wear a mask, safety glasses, and gloves while changing used filters.
⚠ Do not modify the machine without FLUX authorization.
⚠ Avoid using it in environments with high humidity or temperatures. Do not place the machine in humid, wet, rainy, or direct sunlight conditions. In the case of rain, extreme heat, or other harsh weather, please stop using the machine and store the vent hose safely indoors.
⚠ Do not place liquid, flammable, or explosive objects near the machine.
⚠ Donotuseitinlaserprocesseswithsparksofflammablematerialsorexplosivedust and gases.
⚠ Do not place any living beings in the machine. It is strictly prohibited.
⚠ There are no noise hazard concerns as the Beam Air Pro's working noise level is below 80 dB(A) at typical operating speed.
Fire Hazard
⚠ Do not leave the machine unattended while in use.
⚠ Replace the Beam Air Pro filters by following filter replacement rules.
⚠ In case of fire, turn off the power immediately and unplug the power cord.
⚠ Always have an accessible, functioning fire extinguisher in the workplace.
⚠ Confirm that the engraving material does not pose any higher risk when burned at high temperatures.
Machine Handling
Comments
0 comments
Article is closed for comments.