Skip to main content

#912 Abnormal Fire Detection

FLUX Support Team
  • Updated

Description

When the system detects that the flame sensor has been triggered, it will pause the task. Please confirm if there is any dangerous fire situation occurring.
Reading this article may not immediately solve your problem; however, by carefully following the steps below, you will collect valuable information to help the FLUX team pinpoint the issue more effectively.

Possible Causes

  1. System failure (Update firmware, restore factory settings, or re-flash the RK mainboard).
  2. Material fire causing the flame sensor to be triggered.
  3. Direct sunlight causing the flame sensor to be triggered.
  4. Ambient light sources causing the flame sensor to be triggered.
  5. Mainboard failure or abnormal signal reading.
  6. Flame sensor malfunction.

Step 1

Please visit the link below to view the steps.

#912 Abnormal Fire Detection

#END

Related articles

Comments

0 comments

Please sign in to leave a comment.