Recommended Frequency
Once every 1 - 2 weeks.
Maintenance Steps
Clean the Y-axis guiding rods and X-axis linear rail to extend the service life of the parts.
Preparation Items
Self-Preparation: Paper towel or tissue paper, Cotton swab or brush
Included in the accessory box: Lubricating oil
1. Cleaning
Use a paper towel or tissue paper to wipe the oil and dust on the Y-axis guiding rods and X-axis linear rail.
2. Oiling
Dip cotton swab or brush in the lubricating oil.
- Y-axis guiding rods and X-axis linear rail：
Use at the Y-axis guiding rods on both sides of the working range > Apply evenly above and on both sides of the X-axis linear rail > Manually move the laser head left and right and forward and backward 3 - 5 times to distribute the lubricating oil evenly.
Use at the Y-axis guiding rods on both sides of the working range > Apply evenly above and on both sides of the X-axis linear rail > Manually move the laser head left and right and forward and backward 3 - 5 times to distribute the lubricating oil evenly.
Comments
0 comments
Please sign in to leave a comment.