| Material Comparison | Wood | Leather | Acrylic | Paper | Felt | Slate | Glass | Metal |
|---|---|---|---|---|---|---|---|---|
| Cutting Difficulty | Easy | Medium | Easy† | Easy | Easy | Difficult | Difficult | Difficult |
| Strength of smell | Medium | Strong | Strong | Faint | Faint | Faint | No | Faint‡ |
| Dustiness | Medium | Medium | Much | Much | Less | Less | Less | Less |
| Amount of tar | Much | Medium | Less | Less | Less | No | No | No |
| Gradation effect | 🟢 | 🟠 | 🟢 | 🟢 | 🟠 | 🟠 | ❌ | ❌ |
† Diode laser machines, such as Ador, cannot cut transparent or light-colored acrylic materials. For engraving on transparent materials, it is necessary to paint them black beforehand.
‡ Metallic dusty smell
The comparisons above are based on common materials. The actual engraving performance may vary, so please conduct your own tests to confirm the results.
Comments
0 comments
Please sign in to leave a comment.