Maintenance Steps : Clean the Y-axis guiding rods, X-axis linear rail and focusing mechanism regularly to extend the service life of the parts.
Preparation Items : Self-Preparation : 1|Paper towel or tissue paper, 2|Cotton swab or brush Included in the accessory box : 3|Lubricating oil
1. Cleaning : Use paper towel or tissue paper to wipe the oil and dust on the Y-axis guiding rods, X-axis linear rail and focusing mechanism.
2. Oiling : Dip cotton swab or brush in the lubricating oil >
- Y-axis guiding rods and X-axis linear rail : Use at the Y-axis guiding rods on both sides of the working range > Apply evenly above and on both sides of the X-axis linear rail > Manually move the laser head left and right and forwards and backwards 3 - 5 times to distribute the lubricating oil evenly.
- Focusing mechanism : Apply at the top of the focusing mechanism.
Manual focusing: Turn the nozzle fastening ring clockwise > Move the CO2 laser module bracket up and down 3 - 5 times and tighten the nozzle fastening ring counterclockwise.
Autofocus: Press and hold the side button to raise and lower the mechanism 3 - 5 times.