Preparation Items :
1 | Super glue
2 | Magnet
Included in the accessory box :
3 | Torx screwdriver
1. Check the door cover sensor magnet : If the door cover sensor magnet is off but not lost, you can point super glue at the magnet base to glue the magnet back. If the magnet is lost, please contact your reseller.
2. Test the magnetic switch :
a. Use a Torx screwdriver to remove 6 screws on the back cover, remove the back cover > Click “MAINTAIN” on the screen > Open and close the door cover continuously, observe whether the door cover symbol is displayed normally in the upper right corner.
b. Take another magnet to cover the magnetic switch > Close the door cover > Observe if the door cover symbol is displayed closed normally in the upper right corner, as shown in the figure.
Troubleshooting Records :
1. Photo :
a. Magnet (whether it is off)
b. Door cover sensor magnet and magnetic reed switch area after closing the door cover
2. Video :
a. Need to include the action of opening and closing the door cover and the change of the door cover symbol.
b. Record the change of door cover symbol before and after taking a magnet to cover the magnetic reed switch.