After completing the replacement, click “Machine > Restore Factory Settings” and “Machine > Hardware Settings > Reset Motherboard Settings” on the machine’s control panel.
If you are unsure about the wiring locations, please refer to the mainboard wiring diagram.
Raspberry Pi wiring instructions may vary by shipping date. Please follow the latest instructions below.
A. SD card slot
B. USB-C Socket to USB-B extension (Back of the machine)
C. Micro-USB Socket to HDMI on the screen
D. No connection
E. Ethernet Extension (Back of the machine)
F. Mainboard’s lower USB port (Refer to above #10)
G. USB extension on the side cover (Right side of the machine)
H. USB 3.0 (to the plotter board’s USB-B port) or USB HUB
I. USB extension on the side cover (Right side of the machine)
10: Lower one connects to “F” on RPi (USB-A to A)
Upper one connects to the touch screen (USB-A to Micro)
Comments
0 comments
Please sign in to leave a comment.