4-10 Firmware Update

How to Update the Firmware:

1. Update the firmware on the machine's panel.
2. Update the firmware with Beam Studio.
3. Update the firmware with the USB Drive.

⚠︎ If your machine cannot connect for updates, please use a USB flash drive to update.

1. Update the firmware on the machine's panel:

Please select the "MACHINE→Settings→Update the Latest Firmware" on the machine's panel.

⚠︎ Suppose you would like to update by the methods below. Please go to the official FLUX website > "Support"> "Downloads" and select the latest firmware to download.

2. Update the firmware with Beam Studio:

Please follow the video to process the update.

3. Update the firmware with the USB Drive:

First, ensure that the USB flash drive capacity is <= 64GB and the disk format is FAT32.
a. Rename it into "autoupdate.fxfw" and copy it to your USB Drive.
b. Plug the USB drive into the machine and reboot it. The update process will take around three to five minutes.

⚠︎ If the firmware version is 2.4.1 or earlier, USB updates are not possible. Please proceed with reflashing the firmware directly onto an SD card.