5-3 Skip or Restart the Start-up Test

Description:

The machine enters the startup test mode during the first boot. However, if there is an issue with the machine, certain steps in the test may not proceed. In such cases, you will need to skip the test first to perform troubleshooting.
In some situations, you may also need to rerun the startup test to confirm the machine's condition. Therefore, this article provides instructions for both skipping and enabling the test. Please use the links below to jump to the relevant section.

• How to skip the startup test
• How to enable the startup test

Skip the Startup Test

Greeting > Select Language > Safety Instructions > Fire Response > Skip Button > Confirm Skip > Main Screen

Enable the Startup Test

Main Screen > Machine > Hardware Settings > Startup Test >
Screen Off > Restart > Enter Startup Test Mode

#END