4-7 Firmware Update

To update your machine's firmware, you have three options:

1. Using the Machine's Panel.
2. Using Beam Studio.
3. Using USB Drive.

⚠︎ If your machine cannot connect for updates, please use a USB flash drive to update.

1. Using the Machine's Panel:

Please select the "MACHINE→Settings→Update the Latest Firmware" on the machine's panel.
(The machine has to be connected to the internet.)

2. Using Beam Studio:

• Firstly, please go to the official FLUX website > "Support"> "Downloads" and select the latest firmware to download.
  
   

• Launch Beam Studio and see the video below for the instructions.

3. Using the USB Drive:

1. Ensure the USB flash drive capacity is ≤ 64GB and formatted to FAT32.
2. Rename the firmware file to "autoupdate.fxfw" and copy it to your USB drive.
3. Plug the USB drive into the machine and reboot it. The update process will take approximately three to five minutes.

#END