Recommended Frequency
Once every 1-2 weeks.
Maintenance Steps
Clean the Y-axis guiding rods, X-axis linear rail, and four lead screws regularly to extend the service life of the parts.
Preparation Items
Self-Preparation:
1｜Paper towel or tissue paper
2｜Cotton swab or brush
Included in the Accessory Box:
3｜Lubricating oil
Cleaning
Use a paper towel or tissue paper to wipe the oil and dust on:
- Y-axis guiding rods
- X-axis linear rail
- Four lead screws
Oiling
Dip a cotton swab or brush in the lubricating oil.
1. Y-axis guiding rods and X-axis linear rail
- Lubricating the Y-axis guiding rods on both sides of the working range
- Apply evenly above and on both sides of the X-axis linear rail
- Manually move the laser head left and right and forward and backward 3 - 5 times to distribute the lubricating oil evenly.
2. Lead screws
- Apply at the surface of the lead screws
- Press the "Up" button and the "Down" button to elevate and lower the honeycomb table once to distribute the lubricating oil evenly.
Comments
0 comments
Please sign in to leave a comment.