2-7 Large Material & Chuck Rotary Engraving Guide

Description

This article explains how to operate when the material height exceeds the machine's working height and when using the Chuck Rotary with the 220x220mm field lens.

Tools

4mm hex wrench included in the accessory box

Step 1

Use the hex wrench to loosen the four screws at the base of the Z-axis column.

Step 2

Rotate the galvanometer arm 90 degrees clockwise.

Step 3

Re-tighten the four screws at the base of the Z-axis column.

Step 4

Place the material or rotary on the left side of the machine platform to begin use.

ⓘ If the rotary appears mirrored, please enable the “Mirror” option in the Rotary Setup in Beam Studio.

For detailed instructions on using the Chuck Rotary, please refer to this guide: Promark - Chuck Rotary Start Engraving

#END