2-2 Assembly and Start-up

Please read the safety regulations carefully before starting the operation.

1. Install the Power Cord and Vent Hose

A. Insert both ends of the power cord into the rear side of the machine and into the outlet.

B. Insert the clamp from the smaller end of the vent hose and put the larger end of the vent hose on the back side of the machine, then use the double-head wrench provided in the accessory box to adjust the tightness of the clamp until the vent hose is not easily loosened.

2. Turn on the Machine

Press the power button to turn on the machine, the first time, it takes about two minutes to turn on.

3. Follow the Screen Instruction

1. Please follow the machine test guide to select the interface language
2. Read FIRE HAZARD carefully
3. Run the Startup Test
4. Set the WiFi connection. Refer to "Connection Settings" for other connection methods.
5. Make sure the machine is connected to the same local network as your PC, Laptop or mobile devices.