Opening Up
Two or more people are required to lift the machine to avoid injury.
1. The box contains the machine and the accessory box.
2. Take the machine out of the box and place it on a stable surface.
Please keep the original carton and cushioning material for future use.
What's in the Accessory Box?
| ID | Item | ID | Item | ID | Item |
|---|---|---|---|---|---|
| 1 | Torx screwdriver | 4 | Double head wrench | 7 | Vent hose |
| 2 | 2.5mm hexagonal wrench | 5 | Lubricating oil | 8 | Power cord |
| 3 | 3mm hexagonal wrench | 6 | Funnel | 9 | Double-sided tape |
| 10 | Clamp | 13 | Pyramid cones | 16 | A4 (Letter size) paper |
| 11 | USB cable | 14 | Manual | 17 | 90-degree USB adapter |
| 12 | Wi-Fi dongle | 15 | Wood piece |
Machine Front
| 1 | Laser head | 4 | Height adjustment button | 6 | Touch panel |
| 2 | Honeycomb table | 5 | Door cover | 7 | Power button |
| 3 | Probe |
Machine Rear
| 1 | USB-A port | 3 | Ethernet port | 5 | Water pump cover |
| 2 | USB-B port | 4 | Power supply | 6 | Ventilation fan and exhaust port |
Machine Right Side
| 1 | USB Ports |
Unboxing Video
Turn on the CC subtitles if needed.
During the Start-up test, please make sure to remove the mirror protection films which are not shown in this video, if your machine doesn't have the films, please skip this step.
Comments
0 comments
Please sign in to leave a comment.