After completing the Beam Studio tutorial, you will know how to carve round and square shapes out of wood.
Required Items： Engraving Material: 3mm wood piece（included in the accessory box）.
Note - To ensure the best engraving results, make sure to follow these steps：
- Engrave before cutting： work from the top to the bottom of the layer. Make sure the engraving layer is on top and the cutting layer is on the bottom. Doing so avoids the collapse of the object after cutting.
-
Cut inner objects before outer ones： If there are multiple cutting objects in the same layer, cut the inner objects first, and then the outer objects. E.g., if object a is in object b, then cut object a before cutting object b.
Steps：
0. Select "Yes" if you would like to start the Beam Studio tutorial.
1. Switch to Preview Mode：
Tap the Camera Preview icon on the left then select the machine in use.
2. Preview the Platform：
a. Place the wood piece on the platform
b. Adjust the focus
c. Close the cover
d. Preview the range of engraving material by clicking on the working interface or selecting a preview range
3. End Preview Mode： Select “End Preview” 。
4. Draw a Rectangle：
Select a “Rectangle（M）” to draw a square in Layer 1. Press Shift to make a square.
5. Drag to Draw：
Drag to draw a square on the working interface.
6. Switch to Layer Panel：
Switch to the layer panel to set the parameters.
7. Set Preset：
Wood - Cutting: “Wood - 3mm Cutting”.
8. Add a New Layer：
Name the new layer Layer 2.
9. Draw a Circle：
Select “Oval (L)” to draw a circle in layer 2. Press Shift to make a circle.
10. Drag to Draw：
Drag to draw a circle in the working interface.
11. Turn on Infill：
Turn on the infill function.
12. Switch to Layer Panel：
Switch to the layer panel to set the parameters.
13. Set Preset：
Wood - Engraving: “Wood - Engraving”.
14. Send the File ：
a. Confirm the parameters and layer settings.
b. Select the name of the machine in use.
c. Click “Start” to start the engraving and cutting process.
Comments
0 comments
Please sign in to leave a comment.