Beambox II - Round Switch (Silver Color) Replacement

Tools

Step 1

Turn off the machine, and remove the power cord.

Step 2

Open the side cover to see the machine inside.

• Use a Philips screwdriver to open the cover.
  
  

Step 3

The switch is here.

Remove the wires on the round switch.

Step 4

Remove the round switch by unscrewing the nut that holds the switch.

Step 5

Install the new round switch by screwing the nut that holds the switch.

Step 6

Ensure the back of the switch is fixed in the same direction as in the photo below.
(The back of the switch is rectangular, and the long sides will be vertical.)

Step 7

Connect the wires on the pins of the switch.

• Demonstration.
  

• Please ensure that the same colors will be on the same sides (left and right only).
  

  Good Example	Bad Examples

• After connecting and ensuring the colors' position is correct, please use the plier to fix the wires securely.
  

Step 8

Close the side cover and tighten the screw.

#END