VI. Troubleshooting
- UH-OH Cannot destructure property 'imgBlob'...
- Software stuck on spinning
- Settings do not persist
- Windows Installer Stuck on "Installing, please wait..."
- #847 Failed to connect to FLUX member service.
- #846 Failed to convert the text to path.
- #845 Failed to connect to the camera module｜Something went wrong with image transmission
- #844 Connection to machine camera has been closed unexpectedly.
- #843 Machine IP address starts with 169.254
- #842 The machine is not on the list
- #841 Connection quality <70 or average response time >100ms'
- #840 Fail to connect to target IP
- #830 Unable to start the task
- #829 Failed to get Beam Studio automatically updated
- #828 Error occurs when setting up the password
- #827 Unable to connect the machine, please check your connection
- #826 Cannot connect to the machine, please make sure USB is attached to the machine
- #825 Error: Command PDF/AI not found
- #824 PDF to SVG converting error
- #823 Failed to update to the latest firmware
- #822 Firmware failed to update
- #821 The application has encountered an unknown error
- #820 Auth Error
- #819 Failed to upload file to FLUX server
- #818 Invalid IP address
- #817 Failed to start network testing
- #816 Failed to save calibration result
- #815 Camera Calibration Failed
- #814 Firmware is too old
- #813 Failed to select machine/Ador - No Calibration Data