4-1 HEXA - Maintenance Checklist – FLUX Help Center

Regular maintenance and startup engraving are necessary even if the machine is not frequently used.
Engraving a sample file once a month (File Location: Beam Studio > File > Examples > Example Files) is recommended to extend the lifespan of the machine and laser tube.
Regular use and proper maintenance ensure optimal machine performance and prevent accelerated aging due to prolonged inactivity.

Area	Maintenance Content	Maintenance Frequency
Panel	MAINTENANCE page*	Once every 1 month
Panel	Screen cleaning	Once every 2 weeks
Working Area	Lubricating
	- Wood, Plywood	Once every 2 weeks
	- Acrylic	Once every 1 week
	- Leather	Once every 2 weeks
	- Paper	Once an operation day
	Honeycomb table cleaning*	Once an operation
	Chassis cleaning*	Once an operation
	Mirrors and lens cleaning*	Once every 1-2 weeks
	Optical path inspection*	When first unboxing, after laser tube replacement once every 1 month
	Optical path alignment	Adjust when the optical path is misaligned
Back Cover	Door cover cleaning	Once every 2 weeks
	Laser tube replacement	Depends on power, usage hours, room temperature, water temperature, etc.
	Chiller water replacement*	Once every 3 months
	Ventilation fan cleaning	Once every 1 month

* Necessary maintenance

Maintenance Checklist

The maintenance checklist outlines essential points that users should check at different intervals.

Print the following table for the machine user or maintenance personnel.

Maintenance Checklist

Area

Item

Key Points

Date

1st month

2nd month

3rd month

W10

W11

W12

Panel

Maintain Test

Check the status display and switches.

－

Screen Cleaning

Clean the dust and grease on the panel.

－

Working
Area

Lubricating

Clean the Y-axis guiding rods, X-axis linear rail, and focusing mechanism, and relubricate them.

－

Honeycomb Table Cleaning

Remove residue and tar oil from the honeycomb table mesh.

－

Chassis Cleaning

Remove residue and tar oil from the chassis and bottom cover.

－

Mirrors and Lens Cleaning*

Clean the 4 mirrors and lens. Make sure they are not oxidized or left with watermarks.

－

Optical Path Inspection*

Clean the grease on the door cover.

－

Back Cover

Door Cover Cleaning

Remove grease from the door cover.

－

Laser Tube Health Check

If 3mm acrylic cannot be cut with 70% power, replace the tube. Replacement timing depends on user acceptance.

－

Cooling Water Replacement

Add water to the pump until it is more than 80% full without air bubbles.

－

Ventilation Fan Cleaning

Remove the dust from the ventilation fan blades.

－

Download the PDF Version of Maintenance Checklist (English)

Maintenance Checklist

Related articles