Recommended Frequency
Once every 1-2 weeks.
Maintenance Steps
Clean the Y-axis guiding rods, X-axis linear rail, and 4 lead screws regularly to extend the service life of the parts.
Preparation Items
Self-Preparation: (1) Paper towel or tissue paper (2) Cotton swab or brush
Included in the accessory box: (3) Lubricating oil
Cleaning
Use a paper towel or tissue paper to wipe the oil and dust on the Y-axis guiding rods, X-axis linear rail, and 4 lead screws.
Oiling
Dip a cotton swab or brush in the lubricating oil.
1. Y-axis guiding rods and X-axis linear rail
- Use at the Y-axis guiding rods on both sides of the working range
- Apply evenly above and on both sides of the X-axis linear rail
- Manually move the laser head left and right and forward and backward 3 - 5 times to distribute the lubricating oil evenly.
2. Lead screws
- Apply at the surface of the lead screws
- Press the "Up" button and the "Down" button to elevate and lower the honeycomb table once to distribute the lubricating oil evenly.
Comments
0 comments
Please sign in to leave a comment.