V. Troubleshooting
- 5-1 Troubleshooting
- 5-2-1 #900 Cooler off
- 5-2-2 #901 Door Opened
- 5-2-3 #902 Overheated
- 5-2-4 #903 Bottom Cover Opened
- 5-2-5 #904 Homing Failed
- 5-2-6 #905 Error when connecting to the mainboard.
- 5-2-7 Material cannot be cut through
- 5-2-8 No Laser Beam Output
- 5-2-9 Mirrors and lens are oxidized or broken
- 5-2-10 Minor electric shocks from chassis
- 5-2-11 Focus probe of manual focusing is cracked
- 5-2-12 #401 Critical Error: Mainboard offline.
- 5-2-13 #402 Critical Error: Subsystem no response.
- 5-2-14 Software Quits Unexpectedly
- 5-2-16 Adjusting the focus
- 5-3-1 Unable to Open Software Properly
- 5-3-2 Other Software Error Codes
- 5-4-1 Connection Issue
- 5-4-2 Camera preview screen stitching is inaccurate, Actual engraving position is different from camera preview position
- 5-4-3 Camera Preview Timeout or Failed to Connect
- 5-4-4 Camera preview speed is too slow
- 5-4-5 Camera preview screen is blurry
- 5-4-6 Camera preview screen is overexposed
- 5-4-7 Language Setting
- 5-4-8 Reflashing SD Card
- 5-4-9 Update beamo Firmware with USB Drive
- 5-5 Contact Customer Service